Monday, April 25, 2011

Sunday Bonnet Tutorial

Every little girl needs a bonnet - even if it's just to play dress up with!



I made this bonnet for Madeline for Plow Days, but then tweaked the pattern and added some ruffles and piping for these babies:

Photobucket

These are really super easy and I'm even going to show you how to shir with elastic thread and make your own piping! As always, I probably included more pictures and instructions than necessary - I know from experience that there is nothing more frustrating than following a tutorial and thinking "I wish they had a picture of that! I have no idea what that means!". As always, feel free to leave questions in the comments, I'll answer them there.



This bonnet will fit most little girls from 2-5 years old.



Ready, set - let's go!

Materials

1/2 yard main fabric
1/4 yard (or less - you may be able to get away with using scraps if you piece strips together, I actually used jelly roll strips I had on hand) trim fabric
elastic thread
thread to match fabric
light to medium weight iron on interfacing
chunky yarn or petite piping

Cut:

From Main fabric:
15 x 15 - cut one
3.5 x 14 - cut two for brim
3.5 x 20 - cut two for ties (alternately, you could use the trim fabric for the ties)

From trim fabric
2.5 x 30 (ish) - cut one for brim ruffle (it's not super crucial to have a particular length here - just as long as it's double your brim length)
1 x 15 - cut one for piping

From interfacing
3.5 x 14 - cut two for brim

Photobucket

1. Fuse your interfacing pieces to the wrong side of the two brim pieces. This will make your bring a little stiffer and not quite so floppy.

Photobucket

2. Using a bowl or other round object - cut a curve into the short end of your brim pieces. (tip: fold the fabric in half length-wise for matching curves.)

Photobucket
3. Repeat with your main bonnet piece.

Photobucket
4. Fold your ruffle piece in half, wrong sides together and iron.

Photobucket

5. Fold your tie pieces in half - right sides together - and iron in half. Fold one short end down at a 45 degree angle (is that right?) and iron. Cut the end of the tie off on the line you just made with your iron, creating a pointed end.

Photobucket

Photobucket

6. Sew your ties together, leaving the short, non pointed end open for turning. Clip corners, turn and iron flat.

Photobucket

7. Grab your ruffle strip and topstitch along the folded edge.

Photobucket

8. Set your stitch length as long as it will go and sew a basting stitch 1/4 inch from the raw edge. Do not backstitch.

Photobucket

9. Pull the bottom bobbin thread to gather your ruffle. You want to gather it as long as the rounded edge of your brim.

Photobucket

10. Line up the raw edge of the ruffle with the rounded raw edge of one of your brim pieces. Sew onto brim piece using a 1/2 inch seam allowance.

Photobucket



11. Place second brim piece over the first brim piece, sandwiching the ruffle piece inbetween them. Pin. Use the stitches from the first brim piece as a guide, sew pieces together.

Photobucket

12. Turn and press.

Photobucket

Piping mini-tutorial

You can skip this step, but the piping really does turn a plain jane bonnet into something a little more special. You could also pre-made piping. Here's how to easily make your own.

I just wanted very small piping, so I used some 8 ply yarn I had on hand.

Iron your 1 inch strip in half

Photobucket

Place your piping (or yarn!) inside the strip in the fold you just created with your iron.

Photobucket

You can use a zipper foot for this step (and you would certainly want to if you ever make larger piping), but I find that using my regular presser foot is fine for small piping like this. Sew as close to the piping as possible, sandwiching the piping in the strip of fabric.

Photobucket

Viola! Piping!




Photobucket

14. Pin your piping on the brim piece, raw edges together. Turn your piping under when you get to where the brim meets the ruffle, as shown in the pictures below and sew onto brim, using the original stitches in piping as a guide.

Photobucket

Photobucket

15. Take your main bonnet piece and iron the bottom straight edge under 1/4 inch and then again another 1/4 inch. Stitch.

Photobucket

16. Iron the sides of the main piece (just up to the curve) under 1/4 inch and then again another 1/4 inch. Stitch.

Photobucket

17. Set your stitch length to the longest it will go and sew around the entire curved edge (3 sides). Sew the stitches on the inside of the finished edges you just sewed - otherwise you won't be able to gather the stiches.

Photobucket

18. Gather the stitches.

Photobucket

19. Pin the bonnet piece to the brim piece, right sides together (piping is sewn on the right side) and raw edges alined. Leave 1 1/2 inches of the main bonnet piece on each end of the brim, as shown in the pictures below.

Photobucket

Photobucket

20. Using a 1/2 inch seam allowance, sew brim and main piece together, using the stitch line from piping on the wrong side of brim piece as a guide.

Photobucket

21. Trim away excess fabric and use a zig zag sitch to reinforce the seam.

Photobucket

Photobucket

Mini shirring tutorial

By using elastic thread in your bobbin, you can create a stretchy stitch that creates a faux smocked look. It's super easy and a great way to create shape.




Photobucket

Thread your thread through the hole in the top of your bobbin and carefully wind the thread around the bobbin by hand.

Photobucket

Photobucket

You don't want to wind it too tight or too loose. When you are finished, it should look something like this:

Photobucket

Load your bobbin as you normally would.

Photobucket

22. With your elastic thread loaded on your bobbin, set your stitch length to it's longest setting and sew three lines into the neck of the bonnet - each 1/4 inch apart, backstitching at the beginning and end of each row. You may need to stretch your fabric out flat when you are sewing your 2nd and 3rd row.

Photobucket

23. Attach your ties by folding the raw end under and stitching to the inside of the neck of the bonnet, right over the shirring rows.

Photobucket

24. Take your bonnet to the iron and steam the shirred rows. The steam shrinks the elastic thread and gives you a nice tightly shirred look. Here's a before and after picture - cool, huh?

Photobucket

Photobucket

Now stick your adorable new bonnet on your favorite little person and admire your handiwork!

Photobucket

Photobucket

Photobucket


I'd love to see a picture if anyone attempts a bonnet from this tutorial!



Molly


The Girl Creative

Friday, April 22, 2011

Easter Outfits!

I had in my mind that I wanted Madeline to have a very old-fashioned Easter dress with a vintage feel to it. A little embroidered collar with hand-made lace, complete with pearl buttons and pintucks.

Uh, yeah. Totally crashed and burned, ya'll.

I made a very poor fabric choice that was way too thin and delicate (read: difficult to work with) and my hand crocheted lace started unraveling after it was sewn into the collar.

So, I started all over with a new plan. I had purchased the "Marissa" dress from The Scientific Seamstress right after it came out and decided it would be a good choice. And yes, more Amy Butler "water bouquet" fabric. Can't get away from it.

Photobucket
Recognize that basket? The tutorial is here. The hat was thrifted for $1...love that!


I'm so pleased with how it came out! And Carla has done it again with another fantastic pattern. If you recall, I used her "Precious Dress" pattern for Maddie's dress last year (it kills me how much she's grown in just a year!).

Photobucket



I bought Will an outfit to wear Easter Sunday, but it was really, really bugging me that he didn't coordinate at all with his sister. So I made a tie to pair with a white shirt and pants that he already had. I know he's mine and that makes me totally biased, but seriously...how cute is he? The tie is from this pattern. I highly recommend it - you'll be seeing plenty more of these on my little guy!


Photobucket

And together?

Photobucket

Photobucket

I can't believe these kids are mine. Am I blessed or what?

Molly

Thursday, April 14, 2011

Bonnets!

I just made seven of these bonnets for a customer. She is using them as Easter gifts for all the little girls in her life. I thought that was an adorable idea! Traditionally, I think an Easter bonnet is a hat, but these work too! I searched the web high and low for the perfect tutorial - but in the end, I just ended up working up my own pattern and method.

Photobucket
Photobucket
Madeline wasn't too happy that she didn't get to keep one - her bonnet from plow days isn't quite as special as this one. So now I guess I have to make another one.

Photobucket Photobucket
I tried several different ways of gathering the back of the bonnet, but in the end - shirring won out! It's fast and easy and looks really nice too. Win-win-win!

Photobucket

Yes, the tutorial is coming. I thought it would be a waste to make 7 of these and not take some pictures. :)


Molly


p.s. If you are reading this, can you comment and let me know if my pictures look ginormous? They look fine on my screen, but I recently looked at my blog from my mom's computer and I had to scroll over to the right to see my pictures and I'm hoping it's not like that for the rest of you. (You know, the three people that still read this blog.) ;)


p.p.s. I really should dedicate this post to my absolutely angelic baby boy. I fully expected to be out of commission in the sewing department for awhile after his birth, but he's an angel, I tell you. Tomorrow I'm tackling my first "boy" sewing project, so I'll have an excuse soon to show his sweet little face.


p.p.p.s. Remember when you were a kid and you would try to add as many pppppps's to a letter as you could because you thought it was cool? What? That was just me? Never mind, then. Over and out.